set clock RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

37A-42
MECHANICAL COMPONENT CONTROLS
Brake pedal switch: Removal - Refitting
37A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the bolts (1) of the steering wheel cover,
-the steering wheel cover (2) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the brake light switch connector (3) .
aTurn the brake light switch (4) a quarter of a turn
anti-clockwise.
aRemove the switch from the pedal assembly. Equipment required
set of feeler gauges
Diagnostic tool
WARNING
The brake pedal position switch must be replaced if
the notched segment is pulled completely out of the
switch.
120279
121350

37A-44
MECHANICAL COMPONENT CONTROLS
Brake pedal switch: Removal - Refitting
37A
aTake a set of feeler gauges
aPut a « 1 mm » shim on the switch support bracket
on the brake pedal (6) .
aLock the brake light switch by turning it a quarter of
a turn clockwise.
aCarefully support the return of the brake pedal while
checking that the shim remains correctly in place.
aWith the shim in place, check that the flange (8) is
not visible.
aDepress the brake pedal by hand.
aRemove the adjusting shim.
aCarefully support the return of the brake pedal.aTake a set of feeler gauges
aPut a 1 mm shim on the brake pedal (7) .
aLock the brake light switch by turning it a quarter of
a turn clockwise.
aCarefully support the return of the brake pedal while
checking that the shim remains correctly in place.
aWith the shim in place, check that the flange (8) is
not visible.
aDepress the brake pedal by hand.
aRemove the adjusting shim.
aCarefully support the return of the brake pedal.
aConnect the brake light switch connector. LEFT-HAND DRIVE
121350
(6) Position of the adjusting shim.
Note:
The brake pedal switch has an automatic adjust-
ment feature, adapting to the pedal position.
The automatic adjustment makes a clicking noise
when in operation.
RIGHT-HAND DRIVE
123860
(7) Position of the adjusting shim.
Note:
The br ake pedal switch has an automatic adjust-
ment feature, adapting to the pedal position.
The automatic adjustment makes a clicking noise
when in oper ation.